Solo 2
Enduro Bearings TorqTite PF30 to DUB Outboard Stainless Steel BLACK
$ 5,078.48
Ver más: ENDURO BEARINGS
PF30 for SRAM DUB (28.99mm) Crank axle
Designed for PF30 bottom bracket shells when using a SRAM DUB crankset.
The TorqTite bottom bracket line is designed to replace any press fit type on the market. This means no more glue, paste or tape to try and keep things quiet. This unique and patent pending system uses a double threaded internal sleeve to tighten the right and left cups with two spanner wrenches and torque your bottom bracket tight on installation. No more movement or internal fretting of your bottom bracket against your carbon fiber or aluminum frame, just a tightened mechanical system eliminating annoying and unwanted noises. Noises and internal friction that can also sap energy and wattage output. TorqTite guarantees perfect parallel alignment between the bearings even if the frame is not perfectly straight, eliminating lost energy.
Available with the best Enduro XD-15 ceramic bearings, or with 440C stainless bearings, the TorqTite system is the ultimate bottom bracket system to guarantee the best results with the highest wattage output and no unwanted friction. Available in a wide range of standards.
Stainless Steel 440C
Our 440C stainless steel bearings offer high corrosion resistance for adverse riding conditions. This high-grade stainless steel is perfect for rolling elements due to its high-carbon content and is harder than other stainless steel variants. We use 440C stainless for the bearing races and the balls. Both 24MM ID and 30MM ID bearings use a 15º angular contact design to handle both radial and axial loads. At Enduro bearings, we design our bearings to use the largest possible ball size to increase load capacity and the overall lifespan of the bearing. Finally, the bearings are sealed on both sides using our LLB seals.
Designed for PF30 bottom bracket shells when using a SRAM DUB crankset.
The TorqTite bottom bracket line is designed to replace any press fit type on the market. This means no more glue, paste or tape to try and keep things quiet. This unique and patent pending system uses a double threaded internal sleeve to tighten the right and left cups with two spanner wrenches and torque your bottom bracket tight on installation. No more movement or internal fretting of your bottom bracket against your carbon fiber or aluminum frame, just a tightened mechanical system eliminating annoying and unwanted noises. Noises and internal friction that can also sap energy and wattage output. TorqTite guarantees perfect parallel alignment between the bearings even if the frame is not perfectly straight, eliminating lost energy.
Available with the best Enduro XD-15 ceramic bearings, or with 440C stainless bearings, the TorqTite system is the ultimate bottom bracket system to guarantee the best results with the highest wattage output and no unwanted friction. Available in a wide range of standards.
Stainless Steel 440C
Our 440C stainless steel bearings offer high corrosion resistance for adverse riding conditions. This high-grade stainless steel is perfect for rolling elements due to its high-carbon content and is harder than other stainless steel variants. We use 440C stainless for the bearing races and the balls. Both 24MM ID and 30MM ID bearings use a 15º angular contact design to handle both radial and axial loads. At Enduro bearings, we design our bearings to use the largest possible ball size to increase load capacity and the overall lifespan of the bearing. Finally, the bearings are sealed on both sides using our LLB seals.
