Solo 1

Maxxis Minion DHR 2 K Tire, 29 x 2.3" 3C/TR/DD

$ 2,297.00
MAXXIS tires Minion DHR II 29 x 2.30 3C MaxxTerra TR DoubleDown

With a completely new profile design, the Minion DHR II is the ideal tire for aggressive gravity driving. With the side lugs of the legendary DHF, which have been slightly widened for even better cornering support, it has extreme cornering support. The center lugs have beveled lugs for better acceleration. Notches on the lugs improve the transition when turning into corners. Part of the center knobs have a paddle shape, they dig in under hard braking and help keep the bike under control.

Tubeless Ready (TR)
tube tires have many advantages: You can drive with less air pressure. This gives better traction and reduces rolling resistance. And where there is no tube , the risk of punctures is also reduced. MAXXIS TR tires are better prepared for mounting with sealant than other "tubeless ready" tires. The bead of our TR tires is completely covered with a rubber layer like a real UST tubeless tube . As a result, tube installation is successful for all rims with standard dimensions the first time you pump it up and with little liquid. "Normal" MAXXIS MTB tires can also be mounted tubeless with sealant like tires from other manufacturers, as the carcass fabric is very dense. However, only the new MAXXIS TR models are officially approved for tubeless assembly and guaranteed by MAXXIS. The tubeless assembly of other models is at your own risk.

Note: We strongly advise against the use of sealant containing ammonia. Ammonia has been shown to attack the carcass and, depending on the amount used, can weaken it by up to 30% after just a few months.

3C MaxxTerra
The right 3C compound for Enduro and Freeride tires. Ease of movement uphill and the best grip downhill characterize this mixture as well as a long service life.

double down
Doubledown tires are constructed like downhill tires: two carcass layers reinforced with a butyl insert in the sidewall. With two 120 TPI (instead of 60 TPI) carcass layers and an aramid bead, they are lighter than downhill tires, significantly more stable and robust than TR + EXO tires and therefore ideal for hard enduro courses.

Technical specifications:

Tire type: folding tires (clincher)
intended use : MTB
Size (inches): 29 x 2.30
Size (ETRTO): 58-622
Design: DoubleDown, Tubeless Ready (TR)
Rubber compound: 3C MaxxTerra
Carcass: 2 x 120 TPI
tubeless capable: yes, tubeless ready
E-bike compatibility: yes, up to 25 km/h
Profile: optimized for the front wheel
recommended air pressure: up to 60 PSI | up to 4.1 bar
Recommended inner rim width: 19 - 35 mm width possible
Maximum load (per tire): not specified
Color: Black